manualshive.com logo in svg

Stairville DCL Flat Par 18x4W CW/WW, Руководство пользователя

Поделиться
Скачать
Stairville DCL Flat Par 18x4W CW/WW Скачать руководство пользователя страница 12

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid

direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter

‘Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately

after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can

damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualified service personnel at regular intervals to prevent overheating and other malfunction.

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC

outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the

user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric

shock or fire.

NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices of identical construction. The current consumption of all other devices connected in series must

not exceed the values indicated in the technical specifications. Otherwise you risk injuries and irreparable damages to the device.

Only connect so many identical devices that the maximum current consumption is not exceeded. Ensure the sufficient dimensioning

(wire cross section) of the power cables used for all devices connected in series.

Safety instructions

 

12

DCL Flat Par 18x4W CW/WW

LED PAR

Содержание DCL Flat Par 18x4W CW/WW

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды