Stairville DCL Flat Par 18x4W CW/WW, Руководство пользователя

Страница: 17 / 48

The infrared sensor for the remote control signals is located on the front panel near the central
LED. Make sure it's not obstructed.
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Infrared sensor for the remote
control
Inserting the battery into the
remote control
Installation
DCL Flat Par 18x4W CW/WW
17
LED PAR