background image

Page 7

NUMERIC KEYPAD

The numeric keypad is located on the right side of the con-
sole.  Before the exercise program begins, the numbers are
used to enter data in response to the console prompts.

• Enter 

- Confirms workout selections and stores the informa-

tion used by the console to calculate workout statistics.

• Clear

 - Erases information from the console memory if

pressed before [ENTER].

ENTERTAINMENT KEYPAD

The FreeClimber comes equipped to facilitate the use of com-
mercial entertainment systems. Using any of these keys will
send an output signal through the Communication Specifica-
tion for Fitness Equipment (C.S.A.F.E.) port to a connected
C.S.A.F.E. or compatible system. If a system is not connected,
pressing these keys will have no effect.

• Volume Up/Down

 - Increases or decreases the volume level of the audio

source.

• Mute 

- Removes the audio sound from the headphones.

• Channel Up/Down

 - Changes the channel of the commercial entertainment

system.

INTENSITY LEVEL KEYS

The exercise intensity level may be changed at any time dur-
ing a workout. Pressing the [

 ∨

 

] key decreases the intensity

and pressing the [

 ∧ ]

 

key increases the  intensity.

STOP KEY

Press the [STOP] key any time you want to pause the exercise
program for up to one minute. Press [STOP] a second time, or
[1], and The console will return to the "SELECT WORKOUT"
Prompt.

CONSOLE KEYS

Содержание MOMENTUM C40






























Отзывы: