Stairmaster 4100PT, Руководство пользователя

Страница: 17 / 34

- 17 -
4100PT Unpacking and Assembling
19. Hold the right neck cover [#21510] in place. There are two
holes in the top of the Main Stepper Cover that align with two round
protrusions in the bottom of the neck cover. Run the main power
cable and contact heart rate cable inside the cover through the top
center hole in the neck cover. (See Figure 6)
20. Install the left neck cover [#21511] by sliding it in place over
the inside edge of the right neck cover and align the two holes in the
top of the main stepper cover with the two round protrusions in the
bottom of the neck cover. Position the neck grommet so that the top
flange of the grommet in resting on the top of the neck covers. (See
Figure 6)
Align rivet holes in the two neck covers and install (qty 8) plastic
rivets. Lightly hammer the head of the rivet until it is seated in the body
of the rivet. (See Figure 6)
Figure 6