S E R V I C E H O T L I N E : 8 0 0 . 7 2 7 . 8 5 2 0 H O T R O N I X . C O M
The Craft Press
The Craft Press
Adjusting Temperature, Time & Pressure
Press the MODE button to cycle through setup modes (with the press ON and the Lift Handle in the UP position):
Displays current
temperature (°F)
Displays print temperature
Displays print time (sec)
Ready to Print
Decrease using (-) button
Decrease using (-) button
Increase using (+) button
Increase using (+) button
Various transfer products will recommend using either “light,” “medium” or “heavy” pressure. Some trial and error may be
required to determine the best pressure setting, but once selected your Sports Ball Heat Press will reliably reproduce the
same pressure, print after print.
With the lift handle in the DOWN position, rotate the patented, Over-the-Center Pressure Adjustment Knob.
Rotate clockwise to increase pressure
Rotate counter-clockwise to decrease pressure
Remember to allow for the thickness of your garment
when adjusting the pressure.
WARNING: Structural damage caused by excessive pressure is not covered
under the limited warranty!
