Installation and operating manual
TEF2580
LED Floodlight
The luminaire can be adjusted into desired angle within a range of 185°.
Only qualified electrical personnel may install and start up the QPD components.
If the lamps are not electrical connected at the installation time, make sure that the QPD plugs are properly
sealed by a sealing plug (or protective cap) for unused cable entries (part no 50500231). If this is not done the
lamp will not be protected against water intrusion. The lamp is delivered with a sealing plug installed.
When the lamp is ready for electrical connection the sealing plug can be removed and the cable can be
connected to the QPD plug. After properly mounting of this parts the floodlight has an IP66/67.
For correct electrical termination please follow the Phoenix user manual, Appendix 1 in the end of this user manual.
Below is an excerpt of the Phoenix user manual describing the main points of the procedure.
