Installation and operating manual
TEF2580
LED Floodlight
Mounting and installation
DANGER
Incorrect mounting and installation may lead to risk for falling objects, risk for electric shock or fire and risk for
equipment malfunction. In turn, this can lead to severe damage and/or injuries.
Mounting
Dimensions:
Tools required
Regular tools required for installation:
•
Tools for mounting, e.g. 13 mm wrench – to fasten the mounting bracket to the structure, and adjust the
angle of the lamp.
•
30mm wrench to loosen and tighten the cable glands.
Fixing
Only qualified personnel are allowed to perform installation and maintenance tasks to this product.
The equipment is ready for installation when leaving the production facilities of R. Stahl Tranberg AS.
Check the condition of the equipment and the contents when unpacking. Any damage done to the equipment during
transportation is not the responsibility of R. Stahl Tranberg AS. If the content is not complete, file a claim to the
manufacturer immediately.
The TEF 2580 is delivered with a standard mounting bracket. The floodlight must be mounted on a flat surface
coincident with the mounting bracket.
Any damage caused by the use of an incorrect combination of cable and cable gland is not the responsibility of
R. Stahl Tranberg AS and is not covered by warranty.
