Safety Advice
Operating Instructions KBDi-DS102W-xxx
R. STAHL HMI Systems GmbH / OI_KBDi-DS102-xxx_en_V_01_00_06.docx / 17.05.2021
Page 9 of 16
Any damage may compromise the explosion protection !
Use the device for its intended purpose only (see "Device Function").
Incorrect or unauthorized use and non-compliance with the instructions in this manual will void
any warranty on our part.
No changes to the device that compromise its explosion protection are permitted !
The device may only be installed and operated in an undamaged, dry and clean condition !
9.2
Special conditions
The intrinsically safe circuits are connected to earth; along the
intrinsically safe circuits potential equalization must exist.
The keyboard has a conductive coating to prevent electrostatic
charges / discharges. If this coating is damaged, the keyboard must
be removed from the hazardous area.
To prevent electrostatic charges / discharges, the keyboard enclosure
must be earthed.
9.3
Cautionary note
This is an EN 55022 Class A product.
In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
CAUTION
ATTENTION
