130937 / 8040606300
2014-06-18·BA00·III·en·03
Explanation of the symbols
3
Control Devices
Series ConSig 8040
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
2
Explanation of the symbols
2.1
Symbols in these operating instructions
2.2
Warning notes
Warnings are sub-divided in these operating instructions according to the following
scheme:
They are always identified by the signalling word “WARNING“ and sometimes also have
a symbol which is specific to the danger involved.
3
General Safety Notes
The devices must be used only for the permitted purpose. Incorrect or impermissible use
or non-compliance with these instructions invalidates our warranty provision. Any altera
-
tions and modifications to the device, impairing its explosion protection, are not permitted.
Use the device only if it is undamaged and clean.
Observe the following information during installation and operation:
- Any damage can invalidate the explosion protection
- National and local safety regulations
- National and local accident prevention regulations
- National and local assembly and installation regulations (e.g. IEC/EN 60079-14)
- Generally recognized technical regulations
- Safety instructions in these operating instructions
- Characteristic values and rated operating conditions on the rating and data plates
- Additional instruction plates fixed directly to the device
4
Conformity to Standards
The relevant standards are listed in the EC Declaration of Conformity respectively IECEx
Certificate of Conformity. These documents are available for download in the download
area on the internet page www.stahl-ex.com.
Action request:
Describes actions to be carried out by the user.
X
Bullet
Information sign:
Describes notes and recommendations.
WARNING
Type and source of the danger!
Possible consequences.
Measures for avoiding the danger.
WARNING
Installation, maintenance, overhaul and repair may only be carried out by appropriately
authorized and trained personnel.
