Stahl 9442/35-10-00, Руководство по эксплуатации

Страница: 39 / 52

Mounting and installation
12
264707 / 944260310010
2017-12-01·BA00·III·en·00
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
CPU module for Zone 2
Series 9442/35
6.2.2 Upgrade of the Series 9440/15 IS1 PROFIBUS CPM on the IS1+ 9442/35 communication
assembly CPU + 9445/35 power 9496/35 base

Switch off the power supply to the IS1 Remote I/O Station (9440/15 CPM).

Disconnect the connection lines for communication.

Pull the blue notch lever of the 9440/15 CPM upwards to unlock the module.

Pull the 9440/15 CPM up to remove it from the 9494 BusRail.

Mount the 9496/35 base (see the 9496/35 operating instructions).
If needed, mount it on the mounting plate as well to reach a higher ambient temperature.

Mount the IS1+ communication assembly in accordance with Section 6.1.2 and
the 9445/35 operating instructions.
6.2.3 Upgrade of the Series 9441/15 IS1 Ethernet CPU on the IS1+ 9442/35 communication
assembly CPU + 9445/35 power 9496/35 base

Remove the IS1 Ethernet CPU and power module
(see the 9441/15 operating instructions).

Switch off the power supply to the 9492/15 IS1 Ethernet base.

Dismount the 9492/15 base (see the 9441/15 operating instructions).

Mount the 9496/35 base (see the 9496/35 operating instructions).
If needed, mount it on the mounting plate as well to reach a higher ambient temperature.

Mount the IS1+ communication assembly in accordance with Section 6.1.2 and
the 9445/35 operating instructions.
6.3 Installation
Unlike the 9492/15 IS1 Ethernet base, the 9496/35 base of the IS1+ CPU is connected
to slot 1 of the BusRail. This moves all I/O modules by one slot (slot n+1). The system
then has to be reconfigured! If there is space available, a 9494/S1-B2 BusRail can also
be connected at the beginning.
Operation under difficult conditions, in particular on ships, requires additional measures
to be taken for correct installation, depending on the operating location. Further
information and instructions on this can be obtained from your regional sales contact
upon request.