Operation
16
162278 / 9440609310
201
9
-0
1
-10·BA00·III·en·0
7
CPU & Power Module for Zone 2 / Div. 2
Series 9440/15
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
10
Operation
10.1 Operation
After mounting, installation and commissioning (see chapter "Mounting and installation"
and "Parameterization and commissioning") the CPU & Power Module is ready for
operation.
Please observe the additional documentation (coupling description)
10.2 Indications
10.2.1 LED displays
The corresponding LEDs on the device indicate the operating conditions of the device
and the line fault states (also refer to chapter "Function and device design").
10.2.2 LCD displays
To display information on the CPM
After setting the fieldbus address, the device boots again.
The fieldbus address is permanently saved and is also available after reset or
recommissioning.
LED
Colour
Meaning
"RUN" LED green
Operation indication: Device runs error-free
"ERR" LED red
Module error
LCD display
Settings
12258E00
• Initial display (shown on the left)
12259E00
• Press ▲ and ▼ simultaneously to switch from the system level
to the module level. The following display appears
(shown on the left).
• Select the desired module by pressing ▲ or ▼ .
• Press ▲ and ▼ simultaneously. The display switches to the
information level.
• Press ▲ or ▼ to switch between different LCD displays
(see following table).
FBAdr
FB
I/O
5
OK
OK
CPM
active
9440/15-01-11
