Stahl 9176 Series, Руководство по эксплуатации, Страница: 27 / 44

222196 / 9176611310
2015-12-22·BA00·III·en·08
Safety Notes
5
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Binary Output without Power Supply
Series 9176
2.3 Symbols on the Device
3 Safety Notes
3.1 Operating Instructions Storage
• Read the operating instructions carefully.
• Store the operating instructions at the mounting location of the device.
• Observe applicable documents and operating instructions of the devices to be
connected.
3.2 Safe Use
Before mounting
• Read and observe the safety notes in these operating instructions!
• Ensure that the contents of these operating instructions are fully understood by the
personnel in charge.
• Use the device in accordance with its intended and approved purpose only.
• Always consult with R. STAHL Schaltgeräte GmbH if using the device under operating
conditions which are not covered by the technical data.
• Observe the document "Cabinet installation guide" for engineering
(download from www.stahl-ex.com, product documentation, subitem "Engineering").
• We cannot be held liable for damage at the device caused by incorrect or unauthorized
use or non-compliance with these operating instructions.
For assembly and installation
• Observe national assembly and installation regulations (e.g. IEC/EN 60079-14).
• Observe national safety and accident prevention regulations.
• During installation and operation, observe the information (characteristic values and
rated operating conditions) on the type and data plates and information signs located
on the device.
• Before installation, make sure that the device is not damaged.
• Electric circuits with the "Ex i" type of protection operated with circuits with other types
of protection can no longer be operated as circuits with the "Ex i" type of protection
after this stage.
Symbol Meaning
05594E00
CE marking according to the current applicable directive.
02198E00
According to marking, electric circuit certified for hazardous areas.
15649E00
Input
15648E00
Output
11048E00
Safety instructions that must always be followed: For devices with this
symbol, the respective data must be noted and / or the safety-relevant
instructions contained in the operating instructions must be followed!