Stahl 8510/1 Series, Руководство по эксплуатации, Страница: 25 / 28

145955 / 8510601300
2016-10-25·BA00·III·en·04
Maintenance and Repair
11
Control unit
Series 8510/1
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
9 Maintenance and Repair
9.1 Maintenance
• Consult the relevant national regulations to determine the type and extent of
inspections.
• Adapt inspection intervals to the operating conditions.
At a minimum, check the following points during maintenance work on the device:
• Whether the clamping screws holding the electric lines have been firmly tightened
• Whether the device has cracks or other visible signs of damage
• Compliance with the permissible service temperature (IEC 60079-0)
9.2 Maintenance
9.3 Repair
9.4 Returning the Device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative at R. STAHL for this.
R. STAHL's customer service is available to handle returns if repair or service is required.
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by R. STAHL
Schaltgeräte GmbH.
Only return or package the devices after contacting and consulting R. STAHL!