Stahl 8510/1 Series, Руководство по эксплуатации, Страница: 20 / 28

Function and Device Design
6
145955 / 8510601300
2016-10-25·BA00·III·en·04
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Control unit
Series 8510/1
Commissioning, maintenance, repair
• Have commissioning and repairs performed only by qualified and authorised persons
(see "Qualification of the personnel" section).
• Before commissioning, make sure that the device is not damaged.
• Perform only maintenance work described in these operating instructions.
3.4 Modifications and Alterations
4 Function and Device Design
4.1 Function
Application range
The 8510 control unit is used to install electrical and electronic components for
controlling, switching, regulating and monitoring electric machines and systems.
It is intended for use for installations in enclosures or control systems with an
"Increased safety e" type of protection.
DANGER
Explosion hazard due to modifications and alterations to the device!
Non-compliance results in severe or fatal injuries.
• Do not modify or alter the device.
No liability or warranty for damage resulting from modifications and
alterations.
DANGER
Explosion hazard due to improper use!
Non-compliance results in severe or fatal injuries.
• Use the device only in accordance with the operating conditions
described in these operating instructions.
• Use the device only for the intended purpose specified in these
operating instructions.