200291 / 8220601300
2015-04-15·BA00·III·en·02
Mounting and installation
13
Control and Distribution Panels
Series 8220
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
DANGER
Explosion hazard due to damaged joint faces!
Non-compliance results in severe or fatal injuries.
• Always carefully lift, take off and attach the enclosure cover.
• Use suitable lifting tool without sharp edges.
• Enclosure cover or enclosure with damaged joint face or thread should
be replaced immediately!
DANGER
Explosion hazard due to cable glands without strain relief!
Non-compliance results in severe or fatal injuries.
• Lead cables and conductors securely.
• If the cables are laid loosely, use only cable entries approved for this
type of cable laying.
WARNING
Danger of electric shock due to energised parts!
Non-compliance can result in severe or fatal injuries.
• All connections and wiring must be disconnected from the power supply.
• Secure the connections against unauthorized switching.
WARNING
Risk of heavy enclosure cover falling down!
Non-compliance can result in severe or fatal injuries.
• Observe the excessive weight of the enclosure cover when opening.
• Before opening the enclosure, get a suitable lifting tool ready (see also
weight of the enclosure cover in chapter "Technical Data").
• Use suitable lifting tool.
• Attach a suitable hinge if necessary.
