Stahl 8070/2 Series, Руководство пользователя

Страница: 57 / 58

258200 / 8070611300
2017-12-13·HB00·III·en·02
Maintenance and Repair
27
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
Position Switches
Series 8070/2
9.2 Maintenance
9.3 Repair
9.4 Returning the Device
• Only return or package the devices after consulting R. STAHL!
Contact the responsible representative at R. STAHL for this.
R. STAHL's customer service is available to handle returns if repair or service is required.
DANGER
Overheating and explosion hazard due to defective switching contacts!
Non-compliance results in severe or fatal injuries.
• Replace the switch after each short circuit in the main circuit
(the element is hermetically sealed and the state of the switching
contacts cannot be checked).
CAUTION
Danger of electric shock due to energised parts!
Non-compliance can result in minor injuries!
• All connections must be disconnected from the power supply.
• Secure the connections against unauthorized switching.
Observe the relevant national regulations in the country of use.
DANGER
Explosion hazard due to improper repair!
Non-compliance results in severe or fatal injuries.
• Repair work on the devices must be performed only by
R. STAHL Schaltgeräte GmbH.
Only return or package the devices after contacting and consulting R. STAHL!