80 086 09 30 0 / 251341
2/5
S-I0M-8008-01-en-2016-07-18
4
Hazardous Location Ratings and Applicable Standards
The Control and Load Switch are in compliance with the following standards:
CAN/CSA-C22.2 No. 0-M91
General Requirements - Canadian Electrical Code Part II
CAN/CSA-C22.2 No.60079-0
Electrical Apparatus for Explosive Gas Atmospheres - Part 0: General
Requirements.
CAN/CSA-C22.2 No.60079-1
Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Construction and
Verification Test of Flameproof Enclosures of Electrical Apparatus
CAN/CSA-C22.2 No.60079-7
Electrical Apparatus for Explosive Gas Atmospheres - Part 7: Increased
Safety 'e'
CSA C22.2 No.14
Standard for Industrial Control Equipment
ANSI/ISA 60079-0
Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres
- Part 0: General Requirements.
ANSI/ISA 60079-1
Standard for Safety for Electrical Apparatus for Explosive Gas Atmospheres -
Part 1: Flameproof enclosures 'd'.
ANSI/ISA 60079-7
Electrical Apparatus for Explosive Gas Atmospheres - Part 7: Increased Safety 'e'
ANSI/UL 508
Standard for Industrial Control Equipment
5
Safety Instructions
Use the control and load switch only for its intended purpose.
Incorrect or impermissible use or non-compliance with these instructions invalidates our warranty
provision.
Any alterations or modifications to the component impairing its explosion protection are not
permitted. The control unit must be use only if it is clean and undamaged.
Observe the following when using the device:
National and local safety regulations
National and local accident prevention regulations
National and local assembly and installation regulations
Generally recognized technical regulations
Safety instructions in these operating instructions
Characteristic values and rated operating conditions on the rating and data plates
Additional instruction plates on the control unit
