Istruzioni Instructions Anleitungen Instrucciones Инструкция
12
Fixing the arm
•
Fix the arm-holding bracket into place, loosely tightening the screws (Fig. 5).
•
Make sure that the barrier arm is covered with it’s lid on one of the 2 sides.
•
Slide the barrier arm into the bracket from the opposite side of it’s lid, slide it along until it
jams into place and screw in tightly the M8 screws that you had left loosely tightened
beforehand (Fig.6).
Fig. 5
Fig. 6
Adjusting the arm:
the standard opening of the barrier is in an anticlockwise direction
as in (Fig. 7).
Fig. 7
