Stages cycling StagesPower, Руководство пользователя

Страница: 13 / 17

Troubleshooting
If no power (watts) or cadence (RPM) signal is being received by your compatible display unit when ridding the bike, please
confirm the following items:
1. Confirm that a fully charged CR2032 battery is properly installed in the power meter according to the reference FIGs 1-5
of this manual.
2. Ensure that the power meter has been successfully paired to the display unit being used according the manufacturer’s
specific
instructions.
3. For further assistance with Troubleshooting, FAQs, videos and useful tips, please visit our website
at:
www.stagescycling.com/support
Maintenance and cleaning
The only items of the power meter that can be serviced by the owner are the battery, battery cover and o-ring. No other items
are serviceable and no attempt should be made to adjust or alter any other items.
When cleaning the power meter use only water dampened cloth to wipe off dirt and debris. Never use any harsh cleaning
chemicals that may damage the plastic housing. Inspect the battery compartment to ensure the batter contact is clean of any
corrosion.
Never directly spray the power meter or battery door with high pressure water. The water pressure from sprayers can
reach thousands of pounds per square inch and may force water past the o-ring damaging the power meter
electronics.