Page | 10
2.6 Battery Kit Assembly (option)
NOTICE:
Replacement battery pack comes fully assembled from the factory. Consult factory for details.
2-battery kit – 1kVA
Step 1
Step 2
Step 3
Step 4
Step 1
: Remove adhesive tapes.
Step 2
: Connect all battery terminals by following below picture.
Step 3
: Put assembled battery packs on one side of plastic shells.
Step 4
: Cover the other side of plastic shell as shown below. Then, battery kit is fully assembled.
3-battery kit – 1.5kVA
Step 1
Step 2
Step 3
Step 4
Step 1
: Remove adhesive tapes.
Step 2
: Connect all battery terminals by following below picture.
Step 3
: Put assembled battery packs on one side of plastic shells and insert one more defect battery in
the open space. (Blank battery is not connected)
Step 4
: Cover the other side of plastic shell as shown below. Then, battery kit is fully assembled
Tape
Tape
Blank
Battery