STACK ST8130 Series Road Car Display Systems
Chapter 3. Operating the Display System
Users Guide
11
Display Layer 5
Display Layer 5
Lap 12 MPH
Lap 12 MPH
Best
Best
1:35.10 135
1:35.10 135
1:35.06
1:35.06
Display layer 5 shows:
•
Number of the current lap
•
Current speed (MPH or km/h)
•
Last lap time
•
Previous best lap time
Press Switch 3 to change the display back to layer 1.
Lap time can be recorded manually using Switch 4 or with the optional
lap timing kit.
Peak Values (Tell Tales)
Peak Values (Tell Tales)
The system can display the peak values (sometimes called ‘tell-tales’)
that have been recorded during a run for all the monitored parameters.
Peak values are updated only when the engine speed has exceeded its
"gate value" for RPM for at least one second. This allows the values to
stabilise. Blipping the engine may not be enough to update the peak
values. The gate value is a predefined RPM value that is used to control
when the system updates the peak values. This is to prevent abnormal
peak values from being recorded when, for example, the engine is either
not running, is idling, or is being warmed up.
The system stores either a maximum or a minimum value as the peak
value, depending on the parameter, as in the following table:
