GUN REST INSTALLATION
1
2
40676-1605
6 20
BACK UP KEY
A "Back Up Key" has been provided in case the
batteries run low. If you lose your key, you may
purchase a replacement key be referencing the serial
number located on the back of your safe or the front
lower right corner. See section regarding
replacement keys for further information.
1. Remove the cover by pressing the tab and turning
the cover as shown in the illustration. The lock can
hang by the connecting cable while unlocking the
safe.
2. Insert the key in the key hole and turn clockwise
1/4 turn (until stopped) in order to unlock the safe.
Rotate the handle and open the door.
3. Keep the door open until you have entered a new
security code. Before entering your new code,
remove the key and screw the cover back in place.
TAB
BACK UP KEY
CLOCKWISE
1/4 TURN
You will need to permanently secure the gun rests to
avoid shifting when accessing your guns.
Attach the 4 brackets in desired location using 2
screws for each bracket as shown in figures 1 and 2
below. The gun rest should be level after assembly.
NOTE: Each gun rest can be positioned at different
heights as desired.
