6) EMERGENCY CHANNELS ~ EMERGENCY CHANNEL SETTING
EMERGENCY CHANNELS
(short press)
Emergency channels will be automatically
selected
by pressing the
EMG
key (
8
). First press:
emergency channel
1
is activated. Second press: emergency channel
2
is activated. Third press:
return to the current channel.
“EMG”
appears on the display when an emergency channel is activated.
The default emergency channels are channel
9/AM
(
1
) and channel
19/AM
(
2
).
Note:
Activating a emergency channel
prevents
changing the modulation mode (AM / FM /
UK) or
enable
/
disable
the
VOX
function. If the
KEY BEEP
function is activated, an error beep
sounds
(see §
KEY BEEP
page 20)
.
EMERGENCY CHANNEL SETTING
Emergency channels can be
customized
(modulation mode and channel).
1.
Short press the
EMG
key (
6
) until
activated
the emergency channel to be modified.
2.
Long press during one second the
EMG
key (
6
).
appears on the display,
“EMG”
blinks.
ID
If necessary, use the
MODE
key (
8
) to
change
the modulation mode: AM, FM or FM UK
(
k
y |}w
?
JD
Turn
th
{
h
OTARY
knob (
4
) the
select
the emergency channel
D
KD
Press
PTT
switch (
11
) to
store
and
exit
. If the
KEY BEEP
function is activated, an long beep sounds
to
confirm
the success of the operation
(see §
KEY BEEP
page 20)
.
LD
If no key is pressed for 5 seconds, the unit automatically
exits
EMERGENCY CHANNEL
without
save
.
M?
F
(short press)
Allows to
set
/
validate
functions
(see for example §
VOX SETTING
above)
. This key pressed alone
don’t have any use.
See §
FREQUENCY BAND SELECTION
page 21.
N?
MODE ~ ANL
MODE
(short press)
Press
MODE
key (
8
) to
select
the modulation mode: AM or FM. Selected mode is displayed on
LCD.
Your modulation mode has to correspond to the one of your correspondent.
-
Frequency Modulation / FM:
for nearby communications on a flat open field.
-
Amplitude Modulation / AM:
commu
nication on a field with relief and obstacles at middle
distance (the most used).
In U
y |}w
only:
The
MODE
key (
8
) allows to
select
the
ENG
or
CEPT
frequency band.
“UK”
is displayed when the
ENG
frequency band is selected. When the
CEPT
frequency band is
selected,
“UK”
disappears from the display
(see table on page 47)
.
ANL
(long press)
Automatic Noise Limiter. This filter allow reducing back ground noises and some reception inter-
ferences.
Long press the
ANL
key (
8
) to
activate
/
disable
the
ANL
filter.
“ANL”
appears on the display
when the filter is activated.
Note:
ANL
filter works only in AM mode
O?
USB CHARGING SOCKET
The
USB
socket (
9
) can be used to charge smartphones, tablets or other rechargeable devices
with 5 V - 2.1 A.
GF?
6 PIN MICROPHONE PLUG
The plug is located on the front panel of the transceiver and makes the setting of the equipment
into the dashboard easier.
See Cabling Diagram page
JN
.
Содержание xm 3006e
Страница 54: ...1RWL HQ 1RWHV 1RWHV 1RWDWNL...
Страница 55: ...1RWL HQ 1RWHV 1RWHV 1RWDWNL...
