21
Operation/functions
Note: If a setting is not activated within 10 seconds the radio set
will automatically adopt the last setting.
There is a double beep
sound.
Switching on/off the radio set
Keep the on/off key pressed for 3 sec. Switching on is accompanied
by a beep sound and the diplay flashes up.
Keep the on/off key pressed for 3 sec. Switching off is accompanied
by a beep sound and
OF
is displayed.
Adjusting the volume
Pushing the
s
(loud) or
t
(mute) keys permits to change the volume
in 7 steps (display ).
Select channel
This function permits to select one of the eight channels.
Note: Always adjust both radio sets to the same channel!
Press the menu key until
1 ch
is flashing.
Select a free channel by means of the
s
or
t
key.
Validate by means of the
PTT
key.
Transmitting
Hold the
PTT
button pressed and speak with normal voice level and
a distance of approx. 5 cm into the microphone. If your message is
finished, release the
PTT
key. If you press the
PTT
key the TX symbol
is displayed.
Receiving
If you receive a signal, the
RX
symbol will be displayed.
Monitor key M
You may bypass the squelch, thus you can also hear weak signals.
Keep the menu- and the
s
key pressed until the RX symbol is displayed.
Pushing the menu key permits to switch on the squelch once again,
the RX symbol is no longer displayed.
Содержание freecomm 250
Страница 26: ...26...
