stabo 51071, Руководство пользователя

Страница: 4 / 12

stabo TTPC amplifier (booster)
Optional accessory to complete the truck
tire pressure monitoring system stabo
TTPC: In long vehicles with a large centre
distance and/or three or more axles, this
booster amplifies the radio signals, which
are to be transmitted to the monitor in the
driver’s cab, from the pressure sensors
mounted on the rear tires.
Scope of delivery
1 amplifier (booster)
with power supply cable (approx. 5.7 m)
1 damping plate
1 mounting angle
operating instructions
Safety warnings
Ensure that the amplifier is installed by a qualified person in a specialist workshop:
The device needs to be connected with care and reliably mounted!
Never open the housing of the amplifier and do not make any modification on the
device.
Regularly check the screw connections of the amplifier and the mounting of the cable.
Mounting and installation
Selecting the mounting position
If possible, position the amplifier centrally on the underside of the vehicle. Mount the
amplifier in a position which is as open as possible, i.e. the device should not be
covered by any parts of the underbody which could impair the propagation of the radio
waves. Never mount the amplifier directly on a metallic surface or a steel girder: You
should use the damping plate included in the scope of delivery by all means! (On the
one hand, the rubber mat provides a minimum distance to the metal; on the other hand
the device is protected against strong vibrations and shocks.)
amplifier
monitor
4