Stabila LAX 600 Series Скачать руководство пользователя страница 5

Страница: 5 / 14

LAX 600 series

4.1 Inserting and charging the battery

Only 12 V Li-ion CAS System (Cordless Alliance System)

battery packs can be used.

Push in the battery pack in the direction of the arrow

until it engages. The battery pack must have an adequate

charge capacity. Fully charge the battery pack before initial

commissioning (observe the display).

Do not recharge a fully charged battery pack.

Check the charge capacity:

Press the red button.

The battery pack must not be inserted in the charger.

LED display:

low charge capacity (<20%) – charge the battery pack

Do not allow the battery pack to become fully discharged.

Charging the battery pack:

Thoroughly read the safety instructions and operating

instructions for the battery pack.

Release the locking device and remove the battery pack

from the laser unit. Insert the battery pack into the charger.

Connect the charger to the mains plug.

Once the charging process has finished, the charger

automatically switches to conservation mode.

The battery pack can remain in the charger.

12 V Li-Power 2.0 Ah
12 V Li-Power 4.0 Ah (optional)

4. Commissioning

100%

20%

100%

Содержание LAX 600 Series















Результаты поиска

Содержание LAX 600 Series

Отзывы:

Похожие инструкции для LAX 600 Series

Бренды по названию

Популярные бренды

Stabila LAX 600 Series, Руководство по эксплуатации

Результаты поиска

Содержание LAX 600 Series

Отзывы:

Похожие инструкции для LAX 600 Series

Бренды по названию

Популярные бренды