7
en
5.2 Automatic operation with relevelling
In some working conditions (where shocks or vibrations
affecting the surface occur, for example), the tilt function is
disruptive. With automatic relevelling, on the other hand, the
unit is readjusted each time it is knocked out of alignment.
Place the laser unit in the appropriate working position
(vertical or horizontal). Press the button (ON/OFF) once.
Then press the “TILT” button to deactivate the tilt function.
The green LED indicates that the unit is switched on and
the laser beam flashes. Once levelling is complete, the
beam stays on constantly and begins to rotate.
When incidents occur that cause misalignment, the laser
beam ceases to rotate. The laser beam flashes. Now the
laser unit relevels itself. Once levelling is completed, the
laser beam begins to rotate once more.
If the unit is inclined at an angle ≥ 5°, it is outside the
self-levelling range and cannot level itself automatically.
Any deviations from the original alignment/setting of the
unit are not indicated (-> Tilt function).
Pressing the “TILT” button again reactivates the tilt function.
