STA-RITE PTM100, Руководство пользователя

Страница: 12 / 15

12
Draining or Lowering Pool Through Auxiliary Drain Port
NOTICE: When using “Auxiliary Drain Port” it is not necessary to disassemble
filter or remove element.
NOTICE: If pool is being drained, use main drain only. Be sure to close valve
in suction pipe leading to skimmers.
1. Stop pump.
2. Attach garden hose or drain hose to Auxiliary Drain Port (see Figure 19).
Position hose so that water runs away from pool to wastewater disposal
area.
3. Open Auxiliary Drain Port valve.
4. Start pump.
5. Open air release valve (Key No. 2, Page 14).
6. When a steady stream of water flows from air release valve, close valve.
WINTERIZING
Hazardous pressure. To avoid severe injury or major property
damage, exactly follow instructions below.
Explosion hazard. Purging the system with compressed air can
cause components to explode, with risk of severe injury or death to anyone
nearby.
Use only a low pressure (below 5 PSI), high volume blower when air
purging the pump, filter, or piping.
NOTICE: Filter must be protected from the weather and drained if freezing is
anticipated. Allowing filter to freeze can cause damage to filter and WILL
VOID THE WARRANTY!
1. Stop pump.
2. Open air release valve.
3. Remove drain plugs from ports or open valves at “Tank Drain” and
“Auxiliary Drain Ports”.
4. Drain ALL piping to and from filter.
A. Gravity drain system as far as possible.
B. Protect areas which retain water with non-toxic propylene glycol
antifreeze (“RV antifreeze”).
5. Turn to Page 8 for filter disassembly instructions.
6. Remove filter element and store in a warm, dry area.
Do not remove or damage safety and instruction labels during
cleaning. Replace any decals which may have been damaged.
Auxiliary
Drain Port
Lowering or
Draining Pool
Using Auxiliary
Drain Port.
950 0594
FIGURE 19