11
INTELLIPRO
®
2 VST Variable Speed Pump Installation and User’s Guide
Set Speeds in Manual Mode
(Speeds 1-4 Only)
1. Press
Menu
.
2. Use
Up
or
Down
arrows to scroll to “Speed 1-8”,
then press
Select
.
3. Use
Up
or
Down
arrows to find the speed (1-4) you
wish to program, then press
Select
.
4. Speeds 1-2 default setting is Manual. Speeds
3-4 default setting is Egg Timer. To set a speed
in Manual mode, press the
Down
arrow (“Set
Speed” will display) and press
Select
to change.
Use the
Up
or
Down
arrow to adjust speed.
5. Press
Save
to save the new speed setting.
Set Speeds in Egg-Timer Mode
(Speeds 1-4 Only)
1. Press
Menu.
2. Use
Up
or
Down
arrows to scroll to “Speed 1-8”,
the press
Select.
3. Use
Up
or
Down
arrow to find the speed (1-4) you
wish to program, then press
Select.
4. Use
the
Up
or
Down
arrows to scroll to “Egg-
Timer”, then press
Select.
5. To set a speed in Egg-Timer mode, press the
Down
arrow (“Set Speed” will display) and press
Select
to change. Use the
Up
or
Down
arrow to
adjust speed.
6. Press
Save
to save the new speed setting.
7. Now press the
Down
arrow (“Set Time” will
display) and press
Select
to change. Use the
Up
or
Down
arrows to adjust the time.
8. Press
Save
to save the new time setting.
Manual Mode Menu Screen
Egg Timer Menu Screen
12:15p
Manual
12:15p
Egg Timer
Time
Set Speed
Pump Menu: Speeds 1-8
SPEED 1-8
MENU
Set Speeds 1-8 in Schedule Mode
In Schedule mode, Speeds 1-8 can be programmed
to run a certain speed at a certain time of day. To run
a scheduled speed, press
Start/Stop
. The screen will
display “Running Schedules” when it is ready to run
a scheduled speed. If
Start/Stop
is pressed while a
scheduled speed is running, the pump will stop running
the scheduled speed. The pump will not continue to
run the scheduled speed until the
Start/Stop
button is
pressed again.
1. Press
Menu
.
2. Use
Up
or
Down
arrows to scroll to “Speed 1-8”,
then press
Select
.
3. Use
Up
or
Down
arrows
and press
Select
for the
speed you wish to set and schedule.
4. Press
Select
(display will be highlighted) and
scroll to “Schedule”.
5. Press
Save
.
6. Press
Down
arrow (“Set Speed” will display) and
press
Select
to change. Use the
Up
or
Down
arrow to adjust speed.
7. Press
Save
to save the new speed.
8. Press
the
Down
arrow again, “Set Start Time” will
display.
Press
Select
-
the cursor will highlight the
minute column.
9. Use
the
Up
or
Down
arrow to change the time
and the
Left
or
Right
arrow to move cursor from
minutes to hours.
10. Press
Save
to save the new start time setting.
11. Press
Down
arrow - “Set Stop Time” will display. P
ress
Select
. Repeat Steps 8-9 to set stop time.
12. Press
Save
to save the new stop time setting.
13. Press
Start/Stop
.
The IntelliPro
®
2 VST Variable Speed Pump will prime
and begin to run the programmed schedule at the
specified start time.
When running in Schedule or Egg Timer mode, the
countdown time (T 00:01) showing the hours and
minutes remaining is displayed.