ST X-NUCLEO-IDW01M1 Скачать руководство пользователя страница 21

Страница: 21 / 21

UM1975

20/20

DocID028608 Rev 1

IMPORTANT NOTICE

–

PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications

, and

improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST

products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of or

der

acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the

design of Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

–

Содержание X-NUCLEO-IDW01M1






















Результаты поиска

Содержание X-NUCLEO-IDW01M1

Отзывы:

Похожие инструкции для X-NUCLEO-IDW01M1

Бренды по названию

Популярные бренды

ST X-NUCLEO-IDW01M1, Руководство пользователя

Результаты поиска

Содержание X-NUCLEO-IDW01M1

Отзывы:

Похожие инструкции для X-NUCLEO-IDW01M1

Бренды по названию

Популярные бренды