Figure 41.
Software end transfer status display
When the transfer is successfully completed, the computed CRC and the transfer time are displayed (see
). In case of failure the display shows an error message.
Figure 42.
ST25DV64KC-DISCO firmware upgrade: transfer done
To start the new firmware, simply tap the screen.
Smart phone and firmware upgrade
Features:
•
Upgrade a new firmware to the ST25DV64KC-DISCO board.
Demonstration steps, see the screen illustration in
:
1.
Check the mailbox status (Must be enable, withtout any pending messages in the mailbox).
2.
Select the “Firmware demos” in the drawer menu and click on “Firmware update button”.
3.
Select the file to be downloaded.
4.
A pop up asks for a password. By default, and for demonstration purpose the password is 12345678.
5.
Start download = Start transfer button.
6.
Smart phone and firmware download.
UM2949
Main menu
UM2949
-
Rev 1
page 36/60
