STLINK-V3SET and B-STLINK-VOLT information
UM2448
38/42
UM2448 Rev 5
13
STLINK-V3SET and B-STLINK-VOLT information
13.1 Product
marking
The sticker located on the top or bottom side of the PCB board shows the information about
product identification such as board reference, revision, and serial number.
The first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx”
is the board reference, “Variant” (optional) identifies the mounting variant when several
exist, "y" is the PCB revision and "zz" is the assembly revision: for example B01.
The second identification line is the board serial number used for traceability.
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be
used as reference design or in production. Any consequences deriving from such usage will
not be at ST charge. In no event, ST will be liable for any customer usage of these
engineering sample tools as reference designs or in production.
“E” or “ES” marking examples of location:
•
On the target STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the STM32 datasheet “Package information” paragraph at the
www.st.com
website).
•
Next to the evaluation tool ordering part number that is stuck or silk-screen printed on
the board.
The board reference for the STLINK-V3SET base board is MB1441, for the adapter board
MB1440, and for the B-STLINK-VOLT board MB1598.
13.2 Board
revision
history
13.2.1 MB1440
Revision B-01
The revision B-01 of the MB1440 board is the initially released version.
13.2.2 MB1441
Revision B-01
The revision B-01 of the MB1441 board is the initially released version.
13.2.3 MB1598
Revision A-01
The revision A-01 of the MB1598 board is the initially released version.
