UM0819
Boards key features
Doc ID 16379 Rev 2
6/37
2 Boards
key
features
2.1
ST802RT1 TX mode Ethernet PHY demonstration board
●
ST802RT1 TX mode Fast Ethernet physical layer transceiver
●
On-board 3.3 V LDO regulator
●
On-board 25 MHz crystal
●
12 jumpers for boot-strap configuration (MII address, auto-negotiation, loopback,
power-down, MII/RMII configuration)
●
Several GND test points and jumpers for power consumption measurement
●
Connectors
–
20-pin full pitch header connector for debug purposes (compatible to the
STM32F107 controller board)
–
40-pin connector compatible to the Spirent Communications SmartBits 200/2000
(SMB-200/ SMB-2000) analysis system (not assembled)
–
RJ45 connector with embedded transformer
2.2
STM32F107 controller demonstration board
●
STM32F107 connectivity line Cortex™-M3 based microcontroller with embedded
Ethernet MAC
●
On-board 3.3 V LDO regulator
●
On-board 25 MHz crystal
●
Reset button, power LED, general-purpose button and two LEDs
●
Connectors
–
20-pin full pitch header connector for debug purposes and compatibility to the
ST802RT1 TX mode demonstration board
–
20-pin JTAG connector
–
Additional general-purpose 20-pin full pitch header connector
–
USB device connector (+5 V power supply)
electronic components distributor