GUI
and evaluation procedure
UM2301
32/57
DocID031141 Rev 1
Through the GUI, you can change the parameters and produce a new cab to program a
batch of new boards. To this aim, dump the parameters into a bin file, but only after clicking
the
Push to target
button.
Figure 38: STSW-STWBCGUI: saving modified parameters (Dump to bin)
Figure 39: STSW-STWBCGUI: bin file backup
You can then select
Modify parameters in CAB file
from the setup menu and select the
appropriate firmware CAB file to be patched. This operation will alter the firmware file with
new tuning parameters, which can be subsequently loaded using the standard procedure.
