3.3
How to use the Frame Programming functions
Frame programming allows you to define and run your own LED sequence programs on the evaluation board.
Step 1.
In the left panel, select the [
Frame Programming
] button.
Figure 16.
Frame Programming functions
Step 2.
Choose how you want to create your frame:
–
In the 8x4 array of circles, toggle the desired LEDs on and off to represent your pattern for a
single frame.
–
Alternatively, you can load a preconfigured LED sequence from one of those available in the
[
Load Presets
] section
Step 3.
Use the [
Frame Brightness
] slider to adjust the brightness of the LEDs for the frame.
Step 4.
Set the total number of frames you want in your sequence in the [
Frame Count
] box.
There can be maximum of 20 frames (00 to 19).
Step 5.
Use the [
←
] and [
→
] arrows to move between the frames in your program.
Step 6.
Press the [
►
] button to run your sequence of frames in the GUI.
Step 7.
Set the required time between frames in the [
Transition Time (ms)
] box.
Step 8.
Press [
Program
] to download your design onto the evaluation board.
UM2554
How to use the Frame Programming functions
UM2554
-
Rev 1
page 13/23
