ST STEVAL-IFS014V1, Руководство пользователя

Страница: 29 / 66

UM0857 Description of the STEVAL-IFS015V1 (smart monitoring node)
Doc ID 16752 Rev 1 29/66
5 Description of the STEVAL-IFS015V1 (smart
monitoring node)
The smart monitoring node (STEVAL-IFS015V1) acts as the end device of the of the ZigBee
network developed by the smart monitoring station (STEVAL-IFS014V1). The smart
monitoring node contains a 122 x 32 graphical LCD which is used to display the information.
In this section of the document we explain in detail the smart monitoring node.
As previously stated, the smart monitoring node can be powered up using the USB supply
or a 3.7 V Li-Ion battery. Once the node is powered up using the on/off switch, various
welcome messages are displayed on the screen. After some time the default screen or the
main screen of the display appears which contains the various parameters and other
information.
5.1 Components of default display screen
Figure 21 shows the complete default screen of the smart monitoring node (STEVAL-
IFS015V1). Some of the components of the screen may not be visible depending on the
conditions.
Figure 21. Details of data screen of STEVAL-IFS015V1
Note: The humidity value of the smart node (STEVAL-IFS015V1) can take some time to stabilize.
5.2 Other messages
During the operation of the smart monitoring system, a number of different messages are
displayed on the screen of the smart monitoring node. These messages are self-
explanatory, but some have been displayed in
Figure 22 .
!-V
.ETWORK
STATUS
,OWBATTERY
INDICATION
7ARNINGINDICATION
BECAUSEOF
THRESHOLDCROSSING
5SERASSIGNEDNOTE
NUMBER
,IGHTINTENSITY
LEVEL
,AMPSTATUS
4IME $ATE
(UMIDITY
VALUE
4EMPERATURE
VALUE
www.BDTIC.com/ST