5.4
Reset circuit
The "mini module" supports different ways to reset the microcontroller. To use and perform the reset driving there
are different jumpers and switches:
Table 4.
Reset configuration jumpers
Jumper
Description
Default
Position
SW1
Reset push button
Open
Figure 9. Overview of SPC58NHADPT386S Rev. C
J29
Connect the external
reset to the reset driver
for ESR0 and PORST
pins
Close
Figure 9. Overview of SPC58NHADPT386S Rev. C
J30
Connect the external
reset to ESR0 pin
Close
Figure 9. Overview of SPC58NHADPT386S Rev. C
J31
Connect the external
reset to PORST pin
Close
Figure 9. Overview of SPC58NHADPT386S Rev. C
5.5
Other Jumpers
Table 5.
Other jumpers
Jumper
Description
Default
Position
J21
EXTREG_SEL
•
1-2
VDD_HV_IO_MAIN
•
2-3 GND 1-2
1-2
(VDD_HV_IO_MAIN)
Figure 9. Overview of SPC58NHADPT386S Rev. C
J22
•
TESTMODE
settings
Close
(10 KΩ down)
Figure 9. Overview of SPC58NHADPT386S Rev. C
UM2789
Reset circuit
UM2789
-
Rev 1
page 11/36