![ST MB467 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/st/mb467/mb467_user-manual_1355486013.webp)
UM0178
4 Hardware
11/37
4.2
L9658 octal squib driver and quad sensor interface ASIC
L9658 is intended to deploy up to 8 squibs and to interface up to 4 satellites. Two satellite
interfaces can be used to interface Hall sensors. Squib drivers are sized to deploy 1.2A
minimum for 2ms minimum during load dump and 1.75A minimum for 1ms minimum during
load dump. Diagnostic of squib driver and squib resistance measurement is controlled by micro
controller. Satellite interfaces support Manchester decoder with variable bit rate.
The main features set are described below:
●
8 deployment drivers sized to deliver 1.2A (min.) for 2ms (min.) and 1.75A(min) for
1ms(min).
●
Independently controlled high-side and low-side MOS for diagnosis
●
Analog output available for resistance
●
Squib short to ground, short to battery and MOS diagnostic available on SPI register
●
Capability to deploy the squib with 1.2A (min.) or 1.75A under 40V load-dump condition
and the low side MOS is shorted to ground
●
Capability to deploy the squib with 1.2A (min.) at 6.9V V
RES
and 1.75A at 12V V
RES.
●
Interface with 4 satellite sensors
Figure 3.
MB467 Airbag Eva Board system block diagram
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from