ST DELTA SOLAR, Руководство пользователя, Страница: 9 / 27

6
6. Data “HOLD” facility
The HOLD function allows to automatically hold the measured values.
The meter holds the measured value on the digital display with a sound
signal and displays “ HOLD ” on LCD display (10). The probes or clamp
measuring point and the measured value
on the digital display(9) can be read. The analog indication is not influe-
HOLD.
The actual measured value can still be noted/read. Note that with
a held digital display, the location of the decimal point is a lso held.
With autoranging selected, the measuring range of the analog indicator
Note: Hold function is not available in function and 30 mV and 300 mV
As long as the data HOLD function is active,manual range selection
is not possible.The data HOLD function is switched OFF, when
7. Minimum value and Maximum value "MIN / MAX"
storage facility.
With the MIN/MAX function,you can hold the minimum and the maximum
measured value which was applied to the input of the Clamp Meter after
activating MIN/MAX function.The most important application is the
determination of the minimum and the maximum value for long-term
monitoring of measured quantities. MIN/MAX does not influence the
analog indication The actual measured value can still be noted/read.
Apply the measured quantity to the meter and select the measuring
range prior to activating the MIN/MAX function.
With the function activated, you can select the measuring ranges
manually, if you switch to another range, the stored MIN/MAX values are
cleared.
The “HOLD” pushbutton(3) is pressed for approx.1s.This is
acknowledged by 2 sound signals.
The function selector switch(6)is operated or
The multimeter is turned OFF and ON again.
is no longer known.
ranges in function .
V
0
C
To activate “HOLD” function momentarily, press the HOLD key.
can now be removed from the
nced by the data