41
PC-EFTPOS i3070 MERCHANT OPERATING GUIDE – TRANSACTION PROCEDURES
5.11.2 Using the Authorisation Number.
TERMINAL DISPLAY
PROCEDURE
READY
LOGO
hh:mm dd/mm/yy
Initiate a completion transaction via the POS.
ENTER ROC NO
ON POS
Leave the input data field blank and press
ACCEPT
.
ENTER AUTH NO
ON POS
Key in the authorisation number of the transaction that
needs completing on the POS and press
ACCEPT
.
SCANNING BATCH
PLEASE WAIT
The terminal will search for the transaction.
CHECKOUT
$X.XX
PRESENT CARD
If presented with a chip card, insert the customer’s
card into the chip card reader. Refer to
Inserting a Chip
Card
in section 4.1.
OR:
If presented with a magnetic stripe card, swipe the
customer’s card through the card reader. Refer to
Swiping
a Magnetic Stripe Card
in section 4.2.
CREDIT
$X.XX
PIN OR ENTER
Have the cardholder key in their
PIN
and press
ENTER
, or
just press
ENTER
.
REMOVE CARD
If a chip card was inserted, remove the card from the
reader.
VERIFY SIGNATURE
CORRECT?
Have the customer sign the receipt. If the signature
matches the signature on the card, press
YES
on the
POS. Otherwise press
NO
.
CREDIT C/O
APPROVED
This message will be displayed if the completion is
approved.
Before completing the sale, check that the transaction was approved. Hand the
customer their copy of the transaction record and their card. If the transaction is
declined, the terminal will display an error message giving the reason. An explanation
of the error code is available in section 9.2, Response Codes.
235220_ST21532_0611.indd 41
4/07/11 4:43 PM