St George DWSG50, Инструкция по эксплуатации прибора

Страница: 13 / 18

• 13 •
TROUBLESHOOTING
If you have problems not covered by these remarks, contact St George After Sales Service on phone
1300 305 366.
Causes
- Is it plugged in ?
- Is the door properly closed ?
- Is the water connected ?
- Programme choice. Choose the programme best adapted
to the type of wash
- Make sure nothing is blocking the circulation of the water
- Check the dishes are properly arranged.
- Only use specially designed washing products
- Check the waste well, filters, arms, joints and door rim are
clean
- Clean the filter
- Check that the washing arm can freely rotate
- Increase the dose of washing product
- Use a new packet of washing product
- Choose a better adapted programme
- Check it is limescale (clean with vinegar). If yes :
- Check the hardness of the water
Too soft water is aggressive for glasses.
- Check the hardness of the water
- Remove food residue immediately after use
- Separate silverware from other metals
- Choose detergent recommended for silverware
- Use knives suitable for dishwashers
- Remove the siphon stop valve
- Check the drain pipe is not bent or crushed
- Check to see if you have moved your dishwasher and
tipped it backwards. To restart the pump, unhook the
draining rod, lay it on the floor at the end of a basin,
draining should restart. Then turn off the “Start/Stop”
button, put the draining rod back and restart your
programme.
This machine complies with all applicable safety standards.
Any repairs should be carried out by a qualified technician.
Repairs carried out by unqualified technicians may be
dangerous for the user.
Problems
The dishwasher will not start
The dishes are not properly washed
Greasy stains
Limescale deposits on the dishes
The dishes are dull
Blackened or marked silverware
Traces of rust on knife blades
The dishwasher does not empty