G
G-P6029-TM001
Issue B
DigiSAFE DISKCRYPT M10 User Manual
10
4.2.2
Smart Card Lockout mode
This mode controls the behavior of DISKCRYPT M10 when the smart card is removed
after authentication. DISKCRYPT M10 allows the user to choose between two smart card
Lockout modes. There are two supported modes:
1.
Lockout (default) – DISKCRYPT M10 is automatically disconnected from the host PC
upon smart card removal.
(The STATUS LED is GREEN in authenticated mode.)
2.
No lockout – DISKCRYPT M10 remains connected to the host PC upon smart card
removal.
(The STATUS LED is RED in authenticated mode.)
To toggle the smart card Lockout mode, follow these steps:
1.
Insert the smart card into DISKCRYPT M10. The keypad will turn on to allow key
entry.
2.
Press the ADMIN button, followed by the ‘1’ button.
3.
Press ENTER. The STATUS LED will blink three times.
4.
Enter the 8-digit Admin PIN and press ENTER. DISKCRYPT M10 will proceed to
change the settings. While the change process is taking place, the STATUS LED will
continue to blink. At the end of the process, DISKCRYPT M10 will provide three ‘beep’
sounds to indicate that this operation is successful.
5.
Remove and reconnect the USB cable to exit the Administrative mode.
Note:
The default mode is the Lockout mode. This is the recommended (higher
security) mode of usage.
In Lockout mode, DISKCRYPT M10 is automatically disconnected from the host PC
upon card removal. Do NOT remove the smart card while DISKCRYPT M10 is being
accessed as this may cause unrecoverable data loss/corruption.
G
G-P6029-TM001
Issue B
DigiSAFE DISKCRYPT M10 User Manual
3
2.2.
Connection Ports
2.3.
Checklist
The following items are included with DISKCRYPT M10. If you discover any missing
items, please contact your local reseller/distributor.
1 x DISKCRYPT M10
1 x USB 3.1 cable
2 x Smart cards
1 x Quick start guide
USB 3.1 Type C receptacle
G
G-P6029-TM001
Issue B
DigiSAFE DISKCRYPT M10 User Manual
3
2.2.
Connection Ports
2.3.
Checklist
The following items are included with DISKCRYPT M10. If you discover any missing
items, please contact your local reseller/distributor.
1 x DISKCRYPT M10
1 x USB 3.1 cable
2 x Smart cards
1 x Quick start guide
USB 3.1 Type C receptacle
