Remote Access Gateway IGW/920 - First Steps
12
S S V
E M B E D D E D
S Y S T E M S
The command prompt is a part of the serial console of the DIL/NetPC DNP/9200 within the
IGW/920. To login enter root as username and root as password. You can now enter any
Linux commands, which will be executed by the DIL/NetPC operating system.
Command
Function
cat
Show file content or write input in file
cd
Change directory
chmod
Change access right for a file
cp
Copy file
ls
List directory- and filenames, access rights, etc.
mkdir
Make new directory
mv
Move file
ps
Overview of active processes
pwd
Show name of actual directory
rm
Remove file
rmdir
Remove empty directory
Table 5:
Some important DIL/NetPC Linux commands
Please note that every Linux command must be confirmed with a carriage return. Some
commands need additional parameters.
Figure 9:
Executing Linux commands with a serial console
Note: The same DIL/NetPC Linux commands are also executable within the scope of
a Telnet session. You will find more details in chapter 5.5 in this manual.