
Remote Access Gateway IGW/920 - First Steps
10
S S V
E M B E D D E D
S Y S T E M S
Now change the settings to the parameters shown in fig. 6 and close the dialog box with a
click on „OK“.
Figure 6:
Communication parameter settings
These settings can also be made in other terminal programs. Important are the following pa-
rameters and values:
Parameter
Wert
Connection speed
115.200 bps
Data bits
8
Parity
None
Stop bits
1
Protocol
No (Xon/Xoff, RTS/CTS or similar)
Table 4:
Terminal program settings
Note: Do not forget to save the session settings with the connection parameters under
the name you have chosen (e.g. IGW/920). With this name you can start the terminal
program for future IGW/920-access.