V. Put the amp tray into place. Hand thread (2) of the factory T30 Screws
into amp tray for alignment
V
S. Align the MRB3 brain on the mounting bosses. Fasten the MRB3
brain to the tray with the provided M5 Phillips screws. Then
connect MRB3 Brain “LINE OUT Ext. amp trigger” to Kicker Amp
500.1 input.
U. Route B-H1942 24” audio extension cable to the passenger sub
encloser. Route B-H1389 69” audio extension cable to the driver
side sub encloser. Connect each extension cable to corresponding
sub encloser.
S
U
R. Locate the (4) mounting bosses on the backside of the SSV Works
amp tray.
T. Route amp power cable down the center of the vehicle. Begin from the front
of the vehicle and lead the ring terminal-end of the cable to the battery.
R
T
T
