C. Pull inner fender forward to expose F65 harness and (2) remaining
T30 torx screws that mount the pod (circled in pink). Compress
release tab to connector and disconnect harness. Remove the (2)
T30 screws retaining the pod. When removing the remaining (2) T30
screws from the pod, be sure to have an extra hand on the pod to
avoid damage.
B. From beneath the passenger side fender, remove (4) T30 screws and
T25 screws highlighted above.
C
B
E. Turn locking pin to battery cover found above center console and
remove battery cover. Disconnect negative and positive cables from
battery,
D. Remove (2) T30 screws from the topside of the inner passenger fender.
Once the inner fender is unfastened, removed the inner fender.
E
D
A. From underneath passenger side fender remove (8) T-30 screws as
shown on the pictures. (Repeat on opposite side)
Stage 1 Kick Panel 6.5” speaker pod
A
