Front Panel Overview and Usage
1.
Headphone outputs
¼” headphone outputs. The right output is a “switched” output: while in use, the Thoebe II will mute the line
output to the connected amplifier.
2. Main display
3. Remote control IR sensor
4. “Stby”: Standby
Provided the Thoebe II is plugged in, use this button to power on the Thoebe II or to put it in standby mode
(indicated by red LED).
5. Input select buttons
Push up or down to select your desired input option. Depending on installed options, these could include
digital inputs (COAX, TOS, USB) and/or phonostage (PHNO). The latter replaces the RCA 4 input if installed.
See “Connections” section for details.
6. Tone and function controls
See “Tone and Function Controls”, next page.
7.
Volume/control knob
Use to increase/decrease volume in normal operation and also in conjunction with Bass, Treble and Balance
adjustments (see “Tone and Function Controls”, next page).
© Spread Spectrum Technologies. All rights reserved
Thoebe II Manual V1
8
