SST Son of Ampzilla II, Руководство пользователя, Страница: 9 / 14

Connections
1. Output R and Output L
Speaker cable 5-way binding posts; spade, banana or bare wire are acceptable termination types. Observe
“R” (Right) and “L” (Left) markings.
⚠
WARNING: Neither output should be connected to ground. Any
damage incurred by doing so will void the warranty.
2. Inputs Balanced/Unbalanced
Right and left analog inputs for XLR (balanced) or RCA (unbalanced) interconnect cables.
3. Input Select
Press the button (in) for RCA input or leave unpressed (out) for XLR input. NOTE: Failure to observe correct
button position may cause the Son II to overheat and go into thermal protection mode. If this occurs, correct
the Input Select button position and allow the amp to cool down before use.
4. AC Input
Be sure to observe proper voltage for your AC cable. Should the fuse need to be replaced, replace with
T6.3A H 250w slow blow fuse.
© Spread Spectrum Technologies. All rights reserved
Son of Ampzilla II Manual V1
9