SST Son of Ampzilla II, Руководство пользователя

Страница: 8 / 14

Front Panel Overview
1. Status LED indicators for left and right channels
“Status”: If lit, indicates power is on and operation is normal.
“B+”: If lit, indicates the positive rail fuse has blown on either the left or right channel and needs to be
replaced.*
“B-”: If lit, indicates the negative rail fuse has blown on either the left or right channel and needs to be
replaced.*
2. Power switch
Push the switch up to power on the Son II, down to power off.
3. Thermal LED indicator
If lit, the Son II is likely being overdriven and is exceeding maximum operating temperature as a result.
Auto-shutdown is likely or imminent. If this occurs, power the Son II off (if it has not automatically done so)
and allow it to cool down before attempting to power on again. If after a period of time the Son II does not
power back on, check the fuse on the back panel and replace if necessary (also see “Input Select” in
Connections section, next page).
*
⚠
Power the Son II off and disconnect power cord before removing top cover and replacing appropriate fuse.
IMPORTANT: Ensure sufficient spacing above, below and around the Son II for proper ventilation.
© Spread Spectrum Technologies. All rights reserved
Son of Ampzilla II Manual V1
8