SST Automation GT200-MT-DN, Руководство пользователя

Страница: 5 / 44

WWW.SSTAUTOMATION.COM 2
1.3 Technical Specifications
[1] Ethernet interface:
● Supports 2 10M/100M adaptive network ports with build-in switch.
● Supports Modbus TCP protocol, the Ethernet interface can be configured as a Modbus TCP server.
● Supports function codes:03H, 04H, 06H, 10H.
● The starting address of the input register is 0 (stores the received CAN frame), and support the function
code 04H.
● The starting address of the output register is 0 (stores the CAN frames that need to be sent), and support
the function codes 03H, 06H and 16H.
● Supports static configuration of IP address and DHCP.
[2] DeviceNet interface:
DeviceNet supports two working modes: scanner station and adapter station. DeviceNet scanner station
supports pre-operation mode and operation mode
[3] As DeviceNet Scanner - Pre-operation mode (Configuration switch 1-ON, 2-OFF)
● Supports device search, namely online scanning DeviceNet adapter through SST-DNET-COM software.
● Supports one-click application of the scanned DeviceNet adapter I/O parameter configuration, and
reading and writing configuration through SST-DNET-COM software.
● Supports reading and writing DeviceNet adapter parameters.
● Supports reading and writing DeviceNet I/O data(polling).
● Supports reading cos commands (COS) (up to 14 bytes).
● Supports DeviceNet baud rate: 125K, 250K, 500K.
● Supports reading and writing product information.
[4] As DeviceNet Scanner - Operation mode (Configuration switch 1-OFF, DIP2-OFF)
● Supports communication with Modbus TCP network.
● The Maximum number of input and output bytes supported by single DeviceNet adapter: 128 byte and
112 bytes.
● The maximum number of input/output bytes supported by DeviceNet adapter: 512 bytes.